Apex Roofing & Construction Text a photoCall 682-558-1382
Homeowner guide

Planning a Bathroom Remodel in Dallas-Fort Worth

Updated Oct 7, 2026 by Apex Roofing & Construction. General information for North Texas homeowners, not legal or insurance advice.

Short answerIn the 2025 Cost vs Value report, a midrange bathroom remodel in Dallas averaged $23,121 and an upscale one $72,769, while HomeAdvisor's national data puts a typical remodel at $6,651 to $17,659. Moving plumbing, changing the layout, custom tile showers, and hidden water damage push the price up. In Texas, most plumbing changes need a city permit, and plumbing and electrical work must be done by state license holders, with limited exceptions.

A bathroom is a small room, but a remodel touches a lot of trades. Plumbing, wiring, the vent fan, waterproofing, tile and fixtures all meet in a few square feet. Good planning helps the budget hold and keeps water out of the walls. This guide covers what remodels cost in DFW, what drives the price, which permits apply, and what to ask before you hire anyone.

How much does a bathroom remodel cost in DFW?

A widely used source for remodel costs is the annual Cost vs Value report from Remodeling and JLC. The 2025 edition was the latest posted when we checked on Oct 7, 2026, and it has figures for Dallas (Cost vs Value 2025, Dallas).

Project (2025, Dallas)Average job costValue added at resaleCost recouped
Midrange bath remodel$23,121$17,51275.7%
Universal design bath remodel$35,974$20,93958.2%
Upscale bath remodel$72,769$31,63443.5%

For comparison, the national midrange bath remodel averaged $26,138.

Know how these numbers are built. The report's costs come from Verisk's XactRemodel estimating data for each market. The resale values come from a survey of more than 6,000 real estate agents (methodology). They are estimates for a defined sample project, not real bids. Your bid will depend on your room and your choices.

HomeAdvisor's national guide, updated June 17, 2026, uses its own project data. It puts the average bathroom remodel at $12,152, with a typical range of $6,651 to $17,659 (HomeAdvisor). It also says:

  • Labor runs roughly 40 to 65 percent of the total.
  • A tub-to-shower conversion typically costs $1,200 to $3,600.
  • Construction permit fees usually run $100 to $1,000.

What drives the cost of a bathroom remodel?

  1. Moving plumbing. Keeping the toilet, sink, and shower where they are is one of the simplest ways to control cost. Moving a drain means opening floors or walls and usually a permit.
  2. The shower. A prefabricated tub or shower unit costs less than a custom tile shower with a built-in pan, niche, bench, and glass.
  3. Tile area and type. More tile, larger formats, and complex patterns take more labor.
  4. Electrical changes. New lighting, outlets, heated floors, or a new circuit add work for an electrician.
  5. Ventilation. A bath fan that vents outdoors helps control moisture.
  6. Cabinets and counters. Stock vanities cost less than custom ones.
  7. Hidden damage. Old leaks can rot subfloor and framing. Plan a contingency for what you find after demo.

Should I choose a shower or a tub?

There is no single right answer. Consider these points:

  • Who uses the room. Small children are easier to bathe in a tub. A low-threshold shower is easier for people with limited mobility.
  • Accessibility. The Cost vs Value report tracks a universal design bath as its own project. It averaged $35,974 in Dallas in 2025.
  • Cost. A simple tub-to-shower conversion falls in HomeAdvisor's $1,200 to $3,600 range. A full custom tile shower costs more.
  • Your other bathrooms. If this is the only tub in the house, think about who will need one later.

How should a shower be waterproofed?

Water damage is a costly mistake because it often happens out of sight. Two code sections set the minimum. DFW cities adopt the International Residential Code (IRC) with local changes. Fort Worth, for example, uses the 2021 IRC (Fort Worth codes).

  • Section R307.2 says shower walls, and walls above tubs with shower heads, must have a nonabsorbent surface at least 6 feet above the floor.
  • Section P2709 requires a waterproof liner or membrane under a site-built shower floor.

Tile alone does not keep water out of the walls. The waterproof layer behind it does that job. Ask your contractor which waterproofing system they use, and whether they test the shower pan for leaks before tile goes on.

Do I need a permit for a bathroom remodel?

Often, yes, if you change plumbing or wiring.

  • Plumbing. Texas law tells cities with plumbing ordinances to require a permit before plumbing work. It exempts repairing leaks and replacing faucets, toilets, ballcocks and water control valves, and garbage disposals (Occupations Code 1301.551).
  • Who does the work. Plumbing must be done by people holding the proper state license or registration, supervised by a license holder. Electrical work requires a state license. A homeowner may do plumbing in their own homestead, and some electrical work by an owner who lives in the home is exempt where the city doesn't regulate it (Occupations Code 1305).
  • City paperwork. Fort Worth's residential remodel checklist asks for mechanical, electrical, and plumbing plans when you alter those systems (Fort Worth).

Your city's building department has the final word. Ask your contractor who pulls the permit and when inspections happen.

What are the steps of a bathroom remodel?

  1. Measure, set a budget, and decide what stays where.
  2. Pick fixtures, tile, and the vanity early. Special orders can hold up the job.
  3. Sign a written contract (see questions below).
  4. Pull permits.
  5. Demolition, then repair any hidden damage.
  6. Rough plumbing and electrical, then rough inspections.
  7. Waterproofing and shower pan test.
  8. Tile, vanity, and fixtures.
  9. Final inspections and walk-through.

How long it takes depends on scope, inspection scheduling, and special-order lead times. Ask for a written schedule.

What should I ask a bathroom remodeling contractor?

  1. Who does the plumbing and electrical work, and what are their license numbers?
  2. Who pulls the permits, and are permit fees in the price?
  3. What waterproofing system will you use, and will you test the pan?
  4. Which items are allowances, and what happens if I pick something pricier?
  5. How do you handle hidden damage and change orders?
  6. What is the payment schedule? Texas law has the owner hold back 10 percent of the contract price until 30 days after the work is complete (Property Code 53.101).
  7. Will you give me a written warranty?
  8. Will I get lien waivers from your subcontractors and suppliers as they are paid?

Texas requires contractors to give homeowners a written disclosure before a residential construction contract is signed. It tells you to get the scope, timeline, cost, and payment terms in writing. Our guide to your rights when you hire a contractor in Texas explains it.

Common questions

Is $10,000 enough for a bathroom remodel?

It can cover a smaller update. HomeAdvisor's national guide, updated June 2026, puts typical bathroom remodels at $6,651 to $17,659, with an average of $12,152. A full midrange remodel in Dallas averaged $23,121 in the 2025 Cost vs Value report, so $10,000 usually means keeping the layout and choosing finishes carefully.

Does a bathroom remodel pay for itself when I sell?

Not fully, on average. In the 2025 Cost vs Value report for Dallas, a midrange bath remodel recouped 75.7 percent of its cost at resale and an upscale bath recouped 43.5 percent. So plan the room mostly around how your family uses it.

Do I need a permit to replace a toilet or faucet in Texas?

State law tells cities with plumbing ordinances to require permits for plumbing work, but it lists exceptions: repairing leaks and replacing faucets, toilets, ballcocks and water control valves, and garbage disposals. Moving or adding lines usually needs a permit. Your city decides the details.

How much does a tub-to-shower conversion cost?

HomeAdvisor's national guide, updated June 2026, puts a tub-to-shower conversion at $1,200 to $3,600. A custom tile shower with new glass and a moved drain can cost more.

Who is allowed to do the plumbing and electrical work?

Texas law says plumbing must be done by people holding the proper state license or registration, under a responsible master plumber, and electrical work requires a state license. Both laws have limited exceptions, such as a homeowner doing plumbing in their own homestead. Ask your contractor for the plumber's and electrician's license numbers.

Sources

  1. Cost vs. Value 2025, Dallas, TX (Remodeling and JLC, Zonda; costs from Verisk XactRemodel) (accessed Oct 7, 2026)
  2. Cost vs. Value 2025 methodology (accessed Oct 7, 2026)
  3. How Much Does a Bathroom Remodel Cost? (HomeAdvisor, updated Jun 17, 2026) (accessed Oct 7, 2026)
  4. Texas Occupations Code Chapter 1301, Plumbers (Secs. 1301.051, 1301.351, 1301.551) (accessed Oct 7, 2026)
  5. Texas Occupations Code Chapter 1305, Electricians (Secs. 1305.003, 1305.151) (accessed Oct 7, 2026)
  6. Submittal Requirements for Residential Remodels (City of Fort Worth, rev. 05/27/2026) (accessed Oct 7, 2026)
  7. Building and Energy Codes (City of Fort Worth) (accessed Oct 7, 2026)
  8. 2021 International Residential Code, Sections R307.2 and P2709 (International Code Council) (accessed Oct 7, 2026)
  9. Texas Property Code Chapter 53 (Secs. 53.101, 53.255) (accessed Oct 7, 2026)

Have a leak, storm damage or a project in mind?

Free inspections and written estimates, with photos of what we find.