Apex Roofing & Construction Text a photoCall 682-558-1382
Remodeling

Tub to Walk-In Shower Conversion in Fort Worth & Surrounding Areas

Swap a tub you never use for a walk-in shower. It's easier to step into and easier to keep clean. We handle the drain, the waterproofed floor, the tile and the finish, with a written price before we start.

Why people convert a tub to a walk-in shower

People usually convert a tub for one of these reasons:

  • Safety. Stepping over a tub wall gets harder with age, injuries or bad knees. The CDC says more than one out of four older adults falls each year. A low-threshold shower means one less high step on a wet surface.
  • The tub never gets used. In a lot of homes, the tub is just a place to stand while you shower.
  • A bigger, nicer shower. The space a tub takes up makes a roomy shower with a niche, a bench or a second shower head.

What the conversion involves

Taking out a tub and putting in a shower takes more work than people expect. These are the steps:

  1. Demo. The old tub, surround and valve come out, and the rest of the house is protected from dust.
  2. Check what's behind it. Old tub walls hide surprises. We look at the framing, the subfloor and the plumbing before anything new goes in.
  3. Drain work. A tub drain sits at one end, close to the wall. A shower drain usually sits in the middle of the floor, or along one edge for a linear drain. That often means moving the drain.
  4. The shower floor. A site-built shower needs a floor that slopes to the drain and a waterproof layer under it.
  5. Walls. Tile backer, waterproofing, and a built-in niche if you want one.
  6. Valves and fixtures. New valves set at the right height for a shower, plus the shower head, handheld or rain head you pick.
  7. Tile, glass and finish. Tile, grout and sealant, then the glass or curtain rod, and the final cleanup.

What the code says about shower floors and walls

DFW cities build to the International Residential Code (IRC) with local changes. Fort Worth, for example, uses the 2021 IRC. Two sections matter most for a shower:

Tile and grout aren't waterproof on their own. What keeps water out of the framing is the layer behind and under the tile. That hidden layer is where we spend the most care.

Curb or curbless

A curb is a short step at the entry. It's simpler to build and keeps water in the shower.

A curbless shower has a flat entry, so you can walk or roll straight in. It looks clean and works well for anyone with limited mobility. The catch is that the shower floor still has to slope to the drain. So the floor inside the shower must sit lower than the bathroom floor, or the bathroom floor has to come up to meet it.

On a pier and beam house, lowering the floor means framing work under the bathroom. On a slab, it can mean cutting and recessing concrete. If your slab is post-tensioned, nobody should cut it until the steel cables are located. ConcreteNetwork notes that many post-tensioned slabs are stamped to warn owners and contractors. Our slab vs pier and beam guide explains how to tell which you have.

We'll tell you during the walkthrough whether curbless is practical in your bathroom, and what it adds to the job.

Real conversions and showers we've built

A master bath in Flower Mound (in progress, started September 2026). The tub came out to make room for a large walk-in shower, about 8.5 by 4 feet, set on a full mud pan. It has an 18-inch linear drain, a framed-in niche, and two valves running wall, ceiling and handheld heads.

An investor-owned house in Fort Worth (September 2026). The master bath got a new stand-up shower, a 6 by 5 foot floor with 8-foot walls, built on a new mud pan with a niche and new valves.

What we found behind a tub in Weatherford. On one bathroom we opened up, there was no real wall behind the old surround. There were a few metal studs, no insulation, and sand under the tub, and water had been getting in for years. We framed and insulated a new wall before any tile went up. You can't see that kind of thing until demo. A find that big gets photos and a written price before we fix it. Small fixes we handle as we go, and you cover any material they need.

Little things that make a big difference

  • Blocking for grab bars. Even if you don't want grab bars now, wood blocking added in the wall during the build lets you add them later without hunting for studs.
  • A handheld shower head. Easier for rinsing, cleaning the shower, and sitting down if you need to.
  • A niche instead of a shelf. Built in and waterproofed, so shampoo bottles have a home and the corners stay clear.
  • A bench. Built-in or fold-down, if anyone in the house would use one.
  • The exhaust fan. A new shower is a good time to make sure the bathroom fan works and vents outside.

How the job runs with Apex

  1. Walkthrough and measurements. We look at the tub area, the drain, the floor and the access.
  2. Written scope and price. You get a written estimate that lists the work, the materials or allowances, and the price.
  3. Scheduled build. We set a start date and a payment schedule. If something changes mid-job, you hear about it, with the price, before we do it.
  4. Demo and rough-in. With the rest of the house protected.
  5. Waterproofing, tile and fixtures.
  6. Final walkthrough. We walk the finished shower with you, clean up, and hand over your photos and paperwork.

For a bigger bathroom update, see bathroom remodeling and our guide to planning a bathroom remodel in DFW. To talk about your tub, call or text 682-558-1382.

Common questions

How long does a tub to shower conversion take?

It depends on the size of the shower, whether the drain moves, the tile you pick, and what we find behind the old tub. A simple swap in the same footprint goes faster than a larger shower with a moved drain, a bench or a curbless entry. Your written scope lists the expected schedule.

Can any tub be turned into a walk-in shower?

Most can. The tub space is usually about 5 feet long, which is enough for a comfortable shower. The questions are where the drain is, what the floor is made of, and how much room there is for a door or glass. We look at all three during the walkthrough.

What's the difference between a curb and a curbless shower?

A curb is a low step at the shower entry that keeps water in. A curbless shower has no step, which is easier for anyone with limited mobility, but the floor has to be lowered or built up so water still runs to the drain. On a slab, that can mean cutting concrete, which takes more planning.

Should I keep a tub somewhere in the house?

Think about who will live in the house now and later. Families with small children often want at least one tub. If another bathroom has a tub, converting the main one is usually an easy call.

Do I need a permit?

It depends on the city and the job. Fort Worth says replacing plumbing fixtures and cosmetic work like wall and floor coverings don't need a permit, but bigger changes can. We'll tell you what your job needs before we start.

Have a leak, storm damage or a project in mind?

Free inspections and written estimates, with photos of what we find.