Updated Oct 7, 2026 by Apex Roofing & Construction. General information for North Texas homeowners, not legal or insurance advice.
Roof prices are hard to compare because every roof is a different size, shape and condition. This guide shows what published sources say and why their numbers differ. Then it lists what really moves the price on a Fort Worth area home. The figures below come from outside sources. They are not Apex's prices.
How much does a new roof cost in the Dallas-Fort Worth area?
Two widely cited sources give very different answers:
| Source and date | What it measures | Cost |
|---|---|---|
| Cost vs Value 2025, Dallas | Asphalt shingle roof, 30 squares, full tear-off, two skylights | $28,211 |
| Cost vs Value 2025, Dallas | Standing-seam metal roof, 3,000 sq ft, full tear-off | $46,790 |
| Cost vs Value 2025, national | Same asphalt project | $31,871 |
| HomeAdvisor, updated June 2026, national | Typical roof replacement | $5,903 to $13,377 (average $9,609) |
| HomeAdvisor, updated June 2026, national | Per square foot of roof | $4 to $11 |
Sources: Cost vs Value 2025, Dallas and HomeAdvisor. No 2026 Cost vs Value edition was published when we checked.
Why are the published numbers so far apart?
They measure different things.
- Cost vs Value prices one detailed project. The asphalt job assumes 30 squares of shingles, new underlayment, drip edge, flashing, two skylights and a vented ridge on a hip roof. Local costs come from Verisk's remodeling estimating software, adjusted with federal price data (methodology).
- HomeAdvisor reports a typical range across many roofs. Its material ranges assume a roof of about 1,500 to 2,000 square feet, smaller than the 3,000 square foot Cost vs Value roof.
Both are useful as a sanity check. Neither is a quote for your house.
Cost vs Value also estimates resale value. In Dallas, real estate agents surveyed said a new asphalt roof adds about 56.9% of its cost to the sale price. For metal, it was 48.6%.
What is a roofing square?
A square is 100 square feet of roof surface. Roofers and HomeAdvisor commonly price by the square. Your roof has more surface than your floor plan because of the slope and the overhangs, so a one-story house with a 2,000 square foot footprint will have more than 20 squares of roof.
What drives the price of a new roof?
These are the main cost drivers.
- Size. More squares means more material, labor and disposal.
- Pitch (steepness). Steep roofs are slower and need more safety gear. HomeAdvisor lists a steep-roof premium of about $1,000 to $3,000.
- Old layers. A replacement removes the old roofing down to the deck. More layers mean more labor and dump fees. HomeAdvisor lists tear-off at about $1,000 to $3,000 and disposal at about $500 to $1,500. Arlington's guidance, based on the residential code, says a new roof cannot go over a roof that already has two or more layers.
- Decking (the wood under the shingles). Rotten or broken decking has to be replaced. Arlington's bulletin says damaged decking must be replaced with at least 7/16 inch panels for a common span rating. You often cannot see bad decking until the old roof is off, so ask for a per-sheet price in the contract.
- Flashing, drip edge and crickets. Fort Worth's re-roofing FAQ says drip edge and crickets are required when re-roofing if they are missing now. That adds cost on older homes that never had them.
- Ventilation. Hot attics age shingles faster. The Asphalt Roofing Manufacturers Association says excess heat speeds up the aging of roofing materials and recommends a common minimum of 1 square foot of vent area per 150 square feet of attic floor. Adding ridge or soffit vents adds cost.
- Material class. Basic three-tab shingles cost less than architectural shingles. Impact-resistant and metal roofs cost more. In a 2020 survey, IBHS found impact-resistant shingles that earned its Good or Excellent ratings cost about 4% more per square in the Dallas-Fort Worth market than standard shingles. See our Class 4 shingle guide.
- Skylights, chimneys and valleys. Each one needs custom flashing and time.
- Permits. Rules vary by city. Fort Worth says no permit is needed for a shingle-only replacement on a one- or two-family home, but a permit is needed if any decking is replaced. Arlington requires a permit unless the replaced area is 10 percent or less of the roof. HomeAdvisor lists permits nationally at about $100 to $1,400.
Is $30,000 too much for a roof?
It can be fair or it can be high. It depends on what is included.
For a large or steep roof with full tear-off, decking repairs, new vents and skylights, $30,000 is in the same range as the 2025 Cost vs Value Dallas figure of $28,211. For a small, simple, one-story roof, it would be well above the HomeAdvisor range.
Either way, get at least three written bids for the same scope. TDI says three bids help you spot offers that are too high or too good to be true.
How do I compare roof quotes?
Ask every contractor to put these items in writing:
- Number of squares and the waste factor.
- Number of layers being removed.
- Price per sheet of replacement decking, if needed.
- Underlayment type.
- Shingle brand, product line and impact rating.
- Ventilation work: what vents are added or replaced.
- Flashing, drip edge, valleys and pipe boots: new or reused.
- Who pulls the permit, if one is needed.
- Cleanup, including magnetic sweeps for nails.
- Warranty: the manufacturer's warranty and the contractor's workmanship warranty, each in writing.
- Payment schedule.
On payment, the Texas Attorney General advises not to pay in full until the work is complete and you have inspected it. The same page notes that for homestead improvements over $5,000, the contractor must deposit your payments in a construction account.
Does insurance pay for a new roof?
Only for covered damage, such as a qualifying hail or wind loss, and only under the terms of your policy. Wear and age are not storm damage. If you think a storm damaged your roof, read our roof insurance claim guide before you sign anything.
If your roof is simply getting old, our guide on repair or replace can help you decide whether to spend on a new roof now.
Common questions
What is the average cost of a new roof in Texas?
There is no single official Texas average. The 2025 Cost vs Value report lists $28,211 for a detailed 30-square asphalt roof in Dallas. HomeAdvisor's national guide (updated June 2026) gives a typical range of $5,903 to $13,377. Roof size and scope explain most of the gap.
Is $30,000 too much for a roof?
It depends on the roof. For a large or steep roof with skylights and full tear-off, $30,000 is close to the 2025 Cost vs Value Dallas figure of $28,211 for 30 squares. For a small, simple roof it would be high. Compare at least three itemized bids for the same scope.
What is a roofing square?
A square is 100 square feet of roof surface. A 30-square roof covers about 3,000 square feet of roof, which is more than the home's floor area because of slope and overhangs.
Do I need a permit to replace my roof in Fort Worth?
Fort Worth's roofing FAQ says no permit is needed when only shingles are replaced on a one- or two-family home, and a permit is needed if any decking is replaced. Other cities differ. Arlington requires a permit unless the area replaced is 10 percent or less of the roof.
Do impact-resistant shingles cost much more in DFW?
In a 2020 IBHS survey, impact-resistant shingles rated Good or Excellent by IBHS cost about 4% more per square in the Dallas-Fort Worth market than standard shingles. That was material cost only, and prices change.
Sources
- Cost vs Value 2025, Dallas TX (JLC / Remodeling, published June 2025) (accessed Oct 7, 2026)
- Cost vs Value 2025: Roofing replacement, asphalt shingles (project description) (accessed Oct 7, 2026)
- Cost vs Value 2025: Roofing replacement, metal (project description) (accessed Oct 7, 2026)
- Cost vs Value 2025: Methodology (accessed Oct 7, 2026)
- HomeAdvisor: How much does a new roof cost? (updated 17 Jun 2026) (accessed Oct 7, 2026)
- City of Fort Worth: Residential re-roofing FAQ (PDF) (accessed Oct 7, 2026)
- City of Arlington: Re-roof permits, inspections and common Q&A (13 Sep 2023, PDF) (accessed Oct 7, 2026)
- IBHS: Hail impact performance of asphalt shingles, at a glance (2020, PDF) (accessed Oct 7, 2026)
- Asphalt Roofing Manufacturers Association: Attic space ventilation is key to cooling a roof (Oct 2023, PDF) (accessed Oct 7, 2026)
- Texas Attorney General: How to avoid home improvement scams (accessed Oct 7, 2026)
- Texas Department of Insurance: How to avoid contracting scams (accessed Oct 7, 2026)
