Apex Roofing & Construction Text a photoCall 682-558-1382
Homeowner guide

Re-Roofing in a Fort Worth Historic District: Rules, Approvals and Timelines

Updated Oct 8, 2026 by Apex Roofing & Construction. General information for North Texas homeowners, not legal or insurance advice.

Short answerIf your Fort Worth home is a designated landmark or sits in one of the city's 14 historic districts, roof work may need a Certificate of Appropriateness from the city's historic preservation staff, even when the job needs no building permit. Most cases are approved by staff, while big changes go to the Historic and Cultural Landmarks Commission. District rules often require the same type of roofing material and limit metal roofs and visible vents.

Fort Worth's older neighborhoods include bungalows, Craftsman homes and Tudors. Some of them sit in city historic districts. If yours does, a roof replacement goes through historic review. Homes outside these districts skip that step. This guide explains how it works, using the city's own pages and district guidelines, checked on Oct 8, 2026.

How do I know if my house is historic?

Fort Worth uses three city designations, according to its historic preservation page:

  • HC, Historic and Cultural Landmark. Properties that meet two or more criteria for significance and integrity.
  • HSE, Highly Significant Endangered. Properties that meet three or more criteria and face irretrievable loss.
  • DD, Demolition Delay. For these properties, the city's COA application says the Commission must approve an application but can delay issuing the certificate for up to 180 days.

The city also lists 14 historic districts: Central Handley, Chase Court, Elizabeth Boulevard, Fairmount, Garden of Eden, Hillcrest, Historic Carver Heights, Kenwood Court, Linden Avenue, Mistletoe Heights, Morningside, Terrell Heights, W. A. Powers and Stockyards. The Fairmount guide explains that properties in a city district carry HC overlay zoning.

National Register listing is a different thing. The National Park Service says federal listing by itself places no restrictions on what a non-federal owner may do with the property, unless federal money or permits are involved. Local city rules are what control a Fort Worth roof. If you are not sure which applies, ask the city's design review staff.

What is a Certificate of Appropriateness?

A Certificate of Appropriateness, or COA, is the city's sign-off that exterior changes to a historic property are allowed. The city says you must get one before applying for building permits for exterior alterations, new construction or demolition. Its list of example alterations includes roofing, along with siding, windows, doors, porches and foundation work.

Who approves it:

Who decidesWhat they handle
Historic preservation staff (administrative approval)Most cases, per the city
Historic and Cultural Landmarks CommissionNew construction, demolition, waivers from design guidelines, historic designations, tax exemption verification

The Fairmount guide adds that projects typically approved by staff include repairs or replacement of damaged features, removal of non-original material, and emergency repairs.

Does a shingle-only re-roof need approval?

This is where Fort Worth gets confusing, so plan for a phone call.

  1. Building permit. Fort Worth's re-roofing FAQ says a one- or two-family home does not need a permit to replace only the shingles. The city's residential permit page says replacing decking, sheathing, lathing boards, rafters or ridge boards does need one.
  2. Historic review. The city's historic page lists roofing as work that requires a COA. But the Fairmount guide, in a section on what does not need a COA, lists routine in-kind repair that needs no city permit, and roofing material, except metal roofs. It also tells readers to contact the city for clarification.
  3. District guides that say to ask first. The Mistletoe Heights guidelines tell owners to contact the Historic Preservation Officer early, whether or not a building permit is needed, to find out if a COA is required. They add that a building permit will not be issued until that question is settled.

Because these sources don't line up, contact design review staff before any roof work in a district, describe the job, and keep their answer in writing. If rotten decking turns up mid-job, a building permit becomes necessary, and the historic question has to be answered before that permit can be issued.

What roof rules do the districts set?

Each district has its own guidelines, and some use the Secretary of the Interior's Standards instead. Three examples:

Fairmount. The roofing standards are the most detailed of the district guides we read:

  • Asphalt or fiberglass composite shingles are allowed as an in-kind replacement.
  • Original tile and slate roofs must be kept.
  • Metal is not permitted on main roofs, except metal shingles that accurately copy original materials. Standing seam is allowed on secondary slopes under 4/12 pitch and on accessory buildings. R-panel and rib panel are prohibited on homes.
  • Original roof shape, eave depth and exposed rafter tails must be kept.
  • Vinyl and plastic gutters are prohibited.
  • Recommended, not required, colors are red, green or black, with brown to imitate wood shingles.
  • Ridge vents are appropriate for most homes. Turbines belong only where they can't be seen from the street, and low-profile vents should stay off front slopes.
  • Skylights should be flat, rise no more than 8 inches, and sit on a secondary slope.

Elizabeth Boulevard. The district guidelines say roofing must be replaced with the same type of material, and any change, such as tile to composition, goes to the Commission. Metal is not allowed except historic replica styles, such as metal made to look like clay tile. Attic fans and turbines go on side or rear slopes, and skylights must not be visible from the street. In-kind replacements can proceed with administrative approval.

Mistletoe Heights. Roofing must be replaced with the same type, such as composition to composition. A change in material is reviewed by the Commission, and attic fans or turbines go on a side or rear roof.

Other districts word it differently. The Morningside guidelines, for example, send major changes to the Commission and have staff review all other exterior work before any permit is issued.

These vent rules matter when you fix poor ventilation. See attic ventilation explained for how intake and exhaust vents work together. Ridge vents are low profile and easy to fit within these rules.

How do I apply, and how long does it take?

The city's 2026 COA application lays out the process:

  1. Read your district's guidelines and talk with staff about the project.
  2. Submit the application. For a roof, expect to include a condition assessment with photos of the existing roof. If you are changing materials, add photos and samples or accurate photos of the new material.
  3. The Historic Preservation Officer reviews it and may ask for more information. Many projects are decided at this level.
  4. If it goes to the Commission, a public hearing is typically held within 45 days after staff receives a complete application.
  5. The Commission may approve, approve with conditions, continue or deny. Decisions can be appealed to the Board of Adjustment.

We did not find a COA fee listed on the city's application or historic preservation page. Ask staff when you call.

What if a storm damages my historic roof?

Protect the house first with a tarp or temporary patch. The Fairmount guide lists emergency repairs among projects staff typically approve. Take photos of the damage before and after the temporary work, then contact design review staff about the permanent roof. In the district guides above, replacing like with like is the simplest approval path.

If you are weighing a repair against a full replacement, our guide to repairing or replacing a roof can help, and roofing materials compared for Texas covers options that fit historic styles.

Common questions

Do I need a Certificate of Appropriateness to replace my roof in a Fort Worth historic district?

Check with the city first. Fort Worth's historic preservation page lists roofing among the exterior work that needs a Certificate of Appropriateness. Some older district guides say in-kind roofing does not, but metal does. Contact the city's design review staff before work starts and get the answer in writing.

Does a shingle-only re-roof in Fort Worth need a building permit?

Not on a one- or two-family home, according to the city's re-roofing FAQ. A permit is required if any decking is replaced. Historic review is a separate step, so a permit-free re-roof can still need historic approval in a district.

Who approves roof work in a Fort Worth historic district?

The city says most cases can be approved administratively by historic preservation staff. The Historic and Cultural Landmarks Commission reviews new construction, demolition, waivers from design guidelines, historic designations and tax exemption verification.

Can I put a metal roof on a historic house in Fort Worth?

It depends on the district. Fairmount does not permit metal on main roofs except metal shingles that closely copy original materials, allows standing seam only on low secondary slopes and accessory buildings, and bans R-panel. Elizabeth Boulevard does not allow metal except historic replica styles. Ask staff before you order.

How long does historic approval take in Fort Worth?

Staff-level approvals are handled by the Historic Preservation Officer. If your project goes to the Commission, the city's 2026 application says a public hearing is typically held within 45 days after staff receives a complete application.

Sources

  1. City of Fort Worth: Historic Preservation (accessed Oct 8, 2026)
  2. City of Fort Worth: Historic Districts (accessed Oct 8, 2026)
  3. City of Fort Worth: 2026 Certificate of Appropriateness application (PDF) (accessed Oct 8, 2026)
  4. City of Fort Worth: Fairmount/Southside Historic District Standards and Guidelines, Section 7 Roofing (PDF) (accessed Oct 8, 2026)
  5. City of Fort Worth: Fairmount/Southside Historic District, Section 1 Introduction and Architectural Style (PDF) (accessed Oct 8, 2026)
  6. City of Fort Worth: Elizabeth Boulevard Historic District Standards and Design Guidelines, revised 9 Aug 2007 (PDF) (accessed Oct 8, 2026)
  7. City of Fort Worth: Mistletoe Heights Historic and Cultural District Guidelines (PDF) (accessed Oct 8, 2026)
  8. City of Fort Worth: Historic Morningside District Guidelines, 3 Oct 2006 (PDF) (accessed Oct 8, 2026)
  9. City of Fort Worth: Residential Re-Roofing FAQ (PDF) (accessed Oct 8, 2026)
  10. City of Fort Worth: Residential Permit Information (accessed Oct 8, 2026)
  11. National Park Service: National Register of Historic Places FAQs (accessed Oct 8, 2026)

Have a leak, storm damage or a project in mind?

Free inspections and written estimates, with photos of what we find.