Updated Oct 8, 2026 by Apex Roofing & Construction. General information for North Texas homeowners, not legal or insurance advice.
North Texas is hard on roofs. Summer heat bakes them, and spring hail tests them. Asphalt shingles are the most common residential roofing material, GAF notes, but they are not the only option. The right material depends on your budget, how long you plan to stay, what your house can carry and what your HOA allows. This guide compares the common choices side by side. For more detail, see our guides on Class 4 shingles and how long a roof lasts in Texas.
How do the main roofing materials compare?
| Material | Estimated life | Hail behavior | Weight |
|---|---|---|---|
| 3-tab asphalt | About 20 years | Most hits caused functional damage in IBHS demo | 2.5 to 4 psf (asphalt shingles) |
| Architectural asphalt | About 30 years | Varies by product | 2.5 to 4 psf (asphalt shingles) |
| Class 4 asphalt | Product dependent | Top UL 2218 class; polymer-modified did well in IBHS tests | Similar to asphalt |
| Metal (standing seam or exposed fastener) | 40 to 80 years | Standing seam: dents, no punctures, in IBHS demo | Varies by panel |
| Stone-coated steel | See maker | One DECRA line is Class 4 | 1.6 psf (DECRA Villa) |
| Concrete or clay tile | 100+ years | Rated with an ice-ball test (FM 4473) | 9.5 to 12 psf (standard concrete) |
| Synthetic (polymer) | 10 to 35 years (simulated slate) | One DaVinci line is Class 4 | Marketed as lightweight |
Life estimates are from InterNACHI's chart, which calls them guidelines only. Weights for asphalt and concrete tile are from a 2001 JLC article. "psf" means pounds per square foot.
How do these materials handle hail?
Roof coverings can be rated with a lab impact test. IBHS explains that UL 2218 rates coverings from Class 1 to Class 4 with steel balls 1.25 to 2 inches across, and that tile is rated with a similar test using ice balls (FM 4473). Our Class 4 guide explains the test and its limits.
Real hail is different from a steel ball. In 2013, IBHS fired more than 9,000 lab-made hailstones, up to 2 inches, at a test house. The results:
- Standard 3-tab shingles: most hits caused functional damage.
- Impact-resistant shingles: most hits were cosmetic, but a few punctured the shingle.
- Standing-seam metal: dents, but no punctures. Dents were larger and deeper where metal was installed over old shingles.
Among shingles, IBHS later found that every impact-resistant product rated Good or Excellent against 2-inch hail was made with polymer-modified asphalt. See hail size and roof damage for what different stones can do.
Asphalt: 3-tab, architectural or Class 4?
- 3-tab is the flat, single-layer shingle. It is the shortest-lived shingle on InterNACHI's chart.
- Architectural (laminated) shingles are thicker, and InterNACHI estimates about 10 more years of life than 3-tab.
- Class 4 shingles passed the top UL 2218 level. In an IBHS cost survey, impact-rated shingles that scored Good or Excellent in its hail tests cost only about 4 percent more per square in DFW than standard shingles.
Standing seam or exposed-fastener metal?
Both are steel panels, but they attach differently. McElroy Metal, a panel maker, explains that exposed-fastener panels are screwed through the face with washered screws, while standing seam hides fasteners in clips or flanges under raised seams. On long exposed-fastener panels, temperature swings can enlarge the screw holes over time, which calls for new fasteners and larger washers. Exposed-fastener systems install faster and cost less. Standing seam costs more but allows the metal to expand and contract.
Stone-coated steel is metal pressed into shingle or tile shapes and coated with granules. DECRA's Villa Tile flyer lists a Class 4 hail rating, Class A fire rating and 160 pounds per 100 square feet installed.
What about tile and synthetic roofs?
Concrete and clay tile last a long time but are heavy. JLC reports standard concrete tile at 9.5 to 12 pounds per square foot and lightweight tile at 5.5 to 7. NRCA's Professional Roofing notes lightweight tile can often replace a roof without a structural analysis, but that it is not recommended where hail is frequent. Arlington's bulletin, citing the code, says a new roof cannot be laid over existing tile.
Synthetic roofing is molded polymer made to look like slate or shake. DaVinci's Bellaforte Shake brochure lists UL 2218 Class 4 impact and Class A fire ratings. Lifespan data is thin. InterNACHI lists simulated slate at 10 to 35 years.
Which roofs stay cooler in Texas heat?
A "cool roof" reflects more sunlight and sheds absorbed heat faster. The U.S. Department of Energy says coolness depends on solar reflectance and thermal emittance, each measured from 0 to 1, with higher values meaning a cooler roof. DOE also says:
- Cool versions exist for steep roofs in asphalt shingle, clay tile, concrete tile and metal.
- Cool asphalt shingles cost about the same as standard ones.
- A cool-colored roof can trim at least 5 to 20 percent from a home's cooling costs, with the biggest savings in hot climates.
- Shingles lose some reflectance over time, so compare aged values.
- It is rarely worth replacing a sound roof just to make it more reflective.
Older guides mention ENERGY STAR roofs. That program ended on June 1, 2022. The Cool Roof Rating Council still rates products, and its online directory lists them. Attic ventilation matters too. See attic ventilation explained.
What do the different roofs cost?
The clearest dated local figures come from the 2025 Cost vs Value report for Dallas:
| Project (Cost vs Value 2025, Dallas) | Job cost | Cost recouped at resale |
|---|---|---|
| Asphalt shingles, 30 squares, full tear-off | $28,211 | 56.9% |
| Standing-seam metal, 3,000 sq ft, full tear-off | $46,790 | 48.6% |
Source: Cost vs Value 2025, Dallas. The metal project includes ice-barrier membrane at the edges and synthetic underlayment, and the asphalt project assumes two skylights and a vented ridge. The report does not price tile, stone-coated steel or synthetic roofs, so get written bids for those. Our roof cost guide explains what drives price.
Will my material choice change my insurance?
It can. TDI says each insurer sets its own impact-resistant roof credit, the tests it accepts and the paperwork it needs, and that a Class 4 roof covering would receive the highest credit. TDI also approved optional endorsements in 1998 that exclude cosmetic hail damage to the roof covering on policies that get an impact-resistant roof credit, and the policyholder must sign one for it to apply. That matters for metal roofs that dent but still keep water out. Ask your agent before you choose. Our Class 4 guide covers the cosmetic exclusion and your HOA rights.
How do I choose?
- Decide how long you will own the house.
- Ask your agent what credit each option earns.
- Check HOA rules and any HOA approval steps.
- If you are moving to tile, have a structural engineer check the framing.
- Compare written bids for the same scope.
- Pick a product the installer knows well, and get both warranties in writing. See roof warranty types.
Common questions
What is the most hail-resistant roof for North Texas?
No roof is hail-proof. Look for a UL 2218 Class 4 rating, the top impact class. In an IBHS hail demonstration, standing-seam metal dented but was not punctured, while most hits on standard 3-tab shingles caused functional damage. Impact-rated shingles held up better than 3-tab, though a few hits still punctured them.
Is a metal roof worth it in Texas?
It can be if you plan to stay. InterNACHI estimates 40 to 80 years for metal versus about 30 for architectural shingles. The 2025 Cost vs Value report puts a standing-seam metal roof in Dallas at $46,790, about $18,600 more than its asphalt project. Some policies with an impact-resistant roof credit exclude cosmetic hail dents.
Can my house hold a tile roof?
Maybe. Standard concrete tile weighs about 9.5 to 12 pounds per square foot, versus 2.5 to 4 for asphalt shingles. Lightweight tiles exist, but NRCA notes they are not recommended where hail is frequent. Have a structural engineer check the framing before switching to tile.
Are ENERGY STAR roofs still a thing?
No. The EPA ended ENERGY STAR certification for roof products on June 1, 2022. The Cool Roof Rating Council still rates roofing products for solar reflectance and thermal emittance, and you can search its directory.
Will a Class 4 roof lower my insurance in Texas?
It may. TDI says each insurer decides its own impact-resistant roof credit, test criteria and paperwork, and that a Class 4 covering receives the highest credit. Ask your agent for the dollar amount before you buy.
Sources
- InterNACHI: Standard estimated life expectancy chart for homes (accessed Oct 8, 2026)
- IBHS: Roof 101 (accessed Oct 8, 2026)
- IBHS: Hailstorm demonstration report (Feb 2013, PDF) (accessed Oct 8, 2026)
- IBHS: Hail impact performance of asphalt shingles, at a glance (2020, PDF) (accessed Oct 8, 2026)
- Texas Department of Insurance: Impact-resistant roofing credits (accessed Oct 8, 2026)
- Texas Department of Insurance: Commissioner's Bulletin B-0030-98, cosmetic damage exclusion endorsements (accessed Oct 8, 2026)
- GAF RoofViews: What's included in a roof replacement? (Dawn Killough, 24 Jul 2026) (accessed Oct 8, 2026)
- Cost vs Value 2025, Dallas TX (JLC / Remodeling) (accessed Oct 8, 2026)
- Cost vs Value 2025: Roofing replacement, metal (project description) (accessed Oct 8, 2026)
- Cost vs Value 2025: Roofing replacement, asphalt shingles (project description) (accessed Oct 8, 2026)
- U.S. Department of Energy: Consumer guide to cool roofs (Aug 2021, PDF) (accessed Oct 8, 2026)
- Cool Roof Rating Council: ENERGY STAR roofing program sunsets (1 Jun 2022) (accessed Oct 8, 2026)
- JLC: Roofing with concrete tile (Fred Martin, 1 May 2001) (accessed Oct 8, 2026)
- NRCA Professional Roofing: Technical Elements, lightweight tile (Tom Bollnow, May 2007) (accessed Oct 8, 2026)
- DECRA: Villa Tile stone-coated steel product flyer (PDF) (accessed Oct 8, 2026)
- DaVinci Roofscapes: Bellaforte Shake brochure (PDF) (accessed Oct 8, 2026)
- McElroy Metal: Through-fastened vs standing seam metal roofing (28 Oct 2025) (accessed Oct 8, 2026)
- City of Arlington: Re-roof permits, inspections and common Q&A (technical bulletin, 13 Sep 2023, PDF) (accessed Oct 8, 2026)
