Apex Roofing & Construction Text a photoCall 682-558-1382
Fort Worth neighborhood

Roofing and Foundation Work in the Fairmount Historic District

Fairmount has more than a thousand historic buildings and its own written roofing standards. This page covers what the city's rules say about shingles, metal, gutters and vents, so you know them before you re-roof.

Short answerFairmount is a City of Fort Worth historic district, and the city lists roofing among the exterior work that needs a Certificate of Appropriateness (COA) before permits are issued. The district's standards allow asphalt or fiberglass shingles as an in-kind replacement, keep original roof shapes and tile or slate, and limit metal roofs. Apply online through the city's Accela portal and get the COA before work starts.

What Fairmount's houses are made of

Fairmount sits on a flat stretch of prairie about two miles south of downtown Fort Worth. The city's guide describes it as an early 20th century streetcar suburb of about 375 acres, developed between 1885 and 1940, with most houses built from 1905 to 1920. The National Register nomination counted 1,016 contributing buildings, and it names the wood-frame bungalow as the most common house. Four Squares are scattered through the district, Queen Anne and Folk Victorian cottages show up in the northern blocks, and the larger homes cluster on the east side. Streetcar lines on Magnolia, Fairmount, College and Hemphill shaped where people built.

Those house types matter for a roof. Bungalows often have low to normal pitched gables, deep eaves and exposed rafter tails. Victorian cottages have hip-and-gable roofs that meet at many angles. Each style has details the city expects to survive a re-roof.

Pier and beam is common here

The nomination lists wood, brick and concrete as Fairmount's foundation materials. It describes porches on concrete block piers and bungalows set on fieldstone and clinker brick piers. Many houses here sit on piers with a crawl space underneath, not on a slab. That changes what you watch for. On a pier and beam house, look for sloping or bouncy floors, doors that drift out of square, and piers or shims that have shifted. Our slab vs pier and beam guide shows how to tell which you have.

The ground adds to it. USDA soil data map most of the district as Sanger clay mixed with urban fill. USDA's official description calls Sanger a very deep clay that takes water in fast when dry and cracked, and very slowly once wet. Clay like that swells and shrinks with the seasons, so gutters that dump water at the foundation can make movement worse. The city lists foundation work among the changes that need a COA in a historic district, and Fort Worth requires a building permit and engineered plans for residential foundation repair.

Fairmount's roofing standards, in plain words

The Fairmount roofing chapter splits its rules into required standards and recommended guidelines. The required ones that touch a typical re-roof:

  1. Keep the original roof shape, form, design and eave depth.
  2. Keep original tile and slate roofs.
  3. Asphalt or fiberglass shingles are allowed as an in-kind replacement.
  4. Metal shingles only if they accurately copy the original shingle. Standing seam only on secondary slopes under 4/12 and on accessory buildings. R-panel and rib-panel metal is prohibited on houses.
  5. Exposed rafter tails may not be boxed in, hidden or removed.
  6. Keep the original gutter profile. New gutters cannot hide rafter tails. Vinyl and plastic gutters are prohibited.
  7. Keep the outside of chimneys, even if the fireplace no longer works.
  8. Place skylights, dishes and other roof equipment where they are least visible from the street, or at least 15 feet back from the front wall.

On ventilation, the chapter says ridge vents suit most houses. Turbines belong only where the street cannot see them, and low profile vents should stay off front slopes. The chapter also recommends, but does not require, red, green or black shingles, brown to imitate wood, and half round or box gutters.

The guidelines also say older changes are not retroactive. If a past owner boxed in the eaves, you are not forced to undo it. New work is reviewed against the standards.

When you need a COA, and how long it takes

The City of Fort Worth lists roofing among the exterior alterations that need a Certificate of Appropriateness before permits are issued. The Fairmount roofing chapter adds that all exterior work needing a building permit needs a COA. An older page of the Fairmount guide says roofing material does not need one, except metal. The sources do not line up, so check first.

The process works like this.

  • Apply online through the city's Accela Citizen Access portal. You get a case number that starts with HCLC.
  • Staff review most cases and approve them administratively. The city does not publish a set number of days for staff review.
  • New construction, demolition and waivers from the guidelines go to the Historic and Cultural Landmarks Commission. It meets the second Monday of each month at 2 p.m. The application deadline is the third Monday of the month before.
  • Questions go to [email protected] or 817-392-8000.

What this means for a roof replacement

Fort Worth does not require a permit for a shingles-only re-roof on a one- or two-family home. Replacing any decking does need one, per the city's re-roofing FAQ. In a hundred-year-old Fairmount house, board decking that needs patching is often found only after tear-off. Since permitted exterior work needs a COA here, ask before signing how a mid-job decking repair will be handled.

Plan for the details too. The review covers rafter tails and gutters as well as the shingles. If you want a heavier impact-resistant shingle, it is still an asphalt shingle, but confirm the look with staff.

Storms over Fairmount

On April 19, 2020, NOAA's Storm Events Database logged 1.75 inch hail at a point inside the district, near Magnolia Avenue. On March 17, 2016, hail up to 2.5 inches fell at the Fort Worth Zoo, a little over a mile west. NOAA estimated that storm caused about $600 million in damage in Tarrant County.

How we work in historic neighborhoods

Before we price a roof in a district like Fairmount, we read the district's standards and photograph the roof, eaves, gutters and chimney as they are today. We put the materials, gutter profile and vent plan in the written estimate, so you can attach it to your COA application. Approval is the city's decision, and work should not start until you have it.

Common questions

Do I need a Certificate of Appropriateness to replace my roof in Fairmount?

Plan on it. The City of Fort Worth's historic preservation page lists roofing among the exterior changes that need a COA, and the Fairmount roofing chapter says all exterior work that needs a building permit needs a COA. An older part of the Fairmount guide says roofing material alone does not, except metal. Because those two sources differ, email [email protected] before you sign a contract.

Can I put a metal roof on a house in Fairmount?

Only in narrow cases. The Fairmount standards allow metal shingles only if they accurately copy the original shingle in look, scale and texture. Standing seam is allowed only on secondary slopes under 4/12 pitch and on accessory buildings. R-panel and rib-panel metal is prohibited on houses.

What shingle colors does Fairmount recommend?

The guide recommends, but does not require, red, green or black for asphalt or fiberglass shingles, with brown used to imitate wood shingles. For metal, it suggests white, galvanized or neutral.

Can I add solar panels or a skylight on a Fairmount roof?

The sustainability standards prefer pole mounts, accessory buildings, rear slopes and the back part of side slopes. Panels on a front slope are allowed only if they raise energy output by more than 10 percent, and they must follow the roof slope and stay below the ridge. Skylights should be flat, rise no more than 8 inches and sit on a minimally visible slope.

Are Fairmount houses pier and beam?

Many are. The National Register nomination lists wood, brick and concrete as the district's foundation materials and describes houses and porches on concrete block, fieldstone and brick piers. Check your own house for a crawl space and vents along the base of the walls.

Sources

  1. City of Fort Worth, Historic Preservation (COA list, Accela application, HCLC schedule, contact)
  2. City of Fort Worth, Historic Districts (district list and guideline links)
  3. Fairmount/Southside Historic District Standards and Guidelines, Section 7: Roofing (City of Fort Worth)
  4. Fairmount/Southside Historic District Standards and Guidelines, Section 1: Introduction and Architectural Style (City of Fort Worth)
  5. Fairmount/Southside Historic District Standards and Guidelines, Section 9: Sustainability (City of Fort Worth)
  6. National Register of Historic Places nomination, Fairmount/Southside Historic District, ref. 90000490 (Texas Historical Commission Atlas)
  7. City of Fort Worth, Residential Re-Roofing FAQ (PDF)
  8. City of Fort Worth, Residential Permit Information
  9. USDA NRCS Soil Data Access (map unit 372416, Sanger-Urban land complex, queried at points inside the district)
  10. USDA NRCS Official Soil Series Description: Sanger
  11. NOAA NCEI Storm Events Database, event 888729: 1.75 inch hail, Fort Worth, 19 Apr 2020
  12. NOAA NCEI Storm Events Database, event 625920: 2.50 inch hail at the Fort Worth Zoo, 17 Mar 2016

Have a leak, storm damage or a project in mind?

Free inspections and written estimates, with photos of what we find.